Publications

SCI, SCI-E, SSCI and AHCI

Mustafa Ercelik, Adnan Ozden, Yilser Devrim, C. Ozgur Colpan (2017), Investigation of Nafion based composite membranes on the performance of DMFCs, International Journal of Hydrogen Energy, Volume 42, 2658-2668

Nurhan Üregen, Kübra Pehlivanoğlu, Yağmur Özdemir, Yılser Devrim (2017), Development of polybenzimidazole/graphene oxide composite membranes for high temperature PEM fuel cells, International Journal of Hydrogen Energy, Volume 42, 2636-2647

Yağmur Özdemir, Nurhan Üregen, Yılser Devrim (2017), Polybenzimidazole based nanocomposite membranes with enhanced proton conductivity for high temperature PEM fuel cells, International Journal of Hydrogen Energy, Volume 42, 2648-2657

Adnan Ozden, Mustafa Ercelik, Yagmur Ozdemir, Yilser Devrim, C. Ozgur Colpan (2017), Enhancement of direct methanol fuel cell performance through the inclusion of zirconium phosphate, International Journal of Hydrogen Energy, Available online 23 February 2017

Yağmur Özdemir, Necati Özkan, Yılser Devrim (2017), Fabrication and Characterization of Cross-linked Polybenzimidazole Based Membranes for High Temperature PEM Fuel Cells, Electrochimica Acta, 245, 1-13

Oliaei, S. N. B., & Karpat, Y. (2017), Built-up edge effects on process outputs of titanium alloy micro milling, Precision Engineering, 49, pp. 305-315

Oliaei, S. N. B., & Karpat, Y. (2017), Investigating the influence of friction conditions on finite element simulation of microscale machining with the presence of built-up edge, The International Journal of Advanced Manufacturing Technology, 90(1-4), pp. 819-829

H.U. Akay, E. Oktay, M. Manguoglu, A.A. Sivas (2016), Improved Parallel Preconditioners for Multidisciplinary Topology Optimisations, International Journal of Computational Fluid Dynamics, 30, 4, pp. 329-336

Yilser Devrim, Ayhan Albostan (2016), Graphene-Supported Platinum Catalyst-Based Membrane Electrode Assembly for PEM Fuel Cell, Journal of Electronic Materials , 45,8, 3900–3907

Dilara Gulcin Caglayan, Berna Sezgin, Yılser Devrim, Inci Eroglu (2016), Three-dimensional modeling of a high temperature polymer electrolyte membrane fuel cell at different operation temperatures, International Journal of Hydrogen Energy, 10060-10070 , Volume 41, Issue 23

Yılser Devrim, Hüseyin Devrim, Inci Eroglu (2016), Polybenzimidazole/SiO2 hybrid membranes for high temperature proton exchange membrane fuel cells, International Journal of Hydrogen Energy, Volume 41, Issue 23, 10044-10052

Berna Sezgin, Dilara Gulcin Caglayan, Yilser Devrim, Thomas Steenberg, Inci Eroglu (2016), Modeling and sensitivity analysis of high temperature PEM fuel cells by using Comsol Multiphysics, International Journal of Hydrogen Energy, Volume 41, Issue 23, 10001-10009

Yılser Devrim, Levent Bilir (2016), Performance investigation of a wind turbine–solar photovoltaic panels–fuel cell hybrid system installed at İncek region – Ankara, Turkey, Energy Conversion and Managemen, Volume 126, 759-766

DEĞİRMENCİ ERCAN, EVCİ CELAL, IŞIK HALİL, MACAR MEHMET, YILMAZ NADİR, DİRİKOLU M. HÜSNÜ, ÇELİK VELİ (2016), Thermo-mechanical analysis of double base propellant combustion in a barrel., Applied Thermal Engineering, 102, pp. 1287-1299

ŞENTÜRK ABDULLAH, IŞIK HALİL, EVCİ CELAL (2016), Thermo-mechanically coupled thermal and stress analysis of interior ballistics problem., International Journal of Thermal Sciences, 104, pp. 39-53

Oliaei, S. N. B., & Karpat, Y. (2016), Investigating the influence of built-up edge on forces and surface roughness in micro scale orthogonal machining of titanium alloy Ti6Al4V, Journal of Materials Processing Technology, 235, pp. 28-40

Oliaei, S. N. B., & Karpat, Y (2016), Influence of tool wear on machining forces and tool deflections during micro milling, The International Journal of Advanced Manufacturing Technology, 84(9-12), pp. 1963-1980

Yavuz, C., Oliaei, S. N. B., Cetin, B., & Yesil-Celiktas, O. (2016), Sterilization of PMMA microfluidic chips by various techniques and investigation of material characteristics, The Journal of Supercritical Fluids, 107, pp. 114-121

O. Aslan (2015), Numerical modeling of hydrogen diffusion in metals accounting for large deformations, International Journal of Hydrogen Energy

O. Özşahin, Y. Altintas (2015), Tool point FRF calculation of spindle – holder – tool assemblies with asymmetric tools, International Journal of Machine Tools and Manufacture, 92, pp. 31-40

O. Özşahin, E. Budak, H. N. Özgüven (2015), Identification of Bearing Dynamics under Operational Conditions for Chatter Stability Prediction in High Speed Machining Operations, Precision Engineering, 42, pp. 53-65

Ziya Karakaya, Besim Baranoğlu, Barbaros Çetin, Ali Yazıcı (2015), A Parallel Boundary Element Formulation for Tracking Multiple Particle Trajectories in Stoke's Flow for Microfluidic Applications, CMES – Computer Modeling in Engineering & Sciences, 104, 227-249

Yılser Devrim, Huseyin Devrim, Inci Eroglu (2015), Development of 500 W PEM fuel cell stack for portable power generators, International Journal of Hydrogen Energy, 40, 7707-7719

Yılser Devrim, Huseyin Devrim (2015), PEM fuel cell short stack performances of silica doped nanocomposite membranes, International Journal of Hydrogen Energy, 40, 7870-7878

Levent Bilir, Mehmet İmir, Yılser Devrim, Ayhan Albostan (2015), An investigation on wind energy potential and small scale wind turbine performance at İncek region – Ankara, Turkey, Energy Conversion and Management, 103, 910-923

Ekin Özgirgin, Yılser Devrim, Ayhan Albostan (2015), Modeling and simulation of a hybrid photovoltaic (PV) module-electrolyzer-PEM fuel cell system for micro-cogeneration applications, International Journal of Hydrogen Energy, , Volume 40, Issue 44 , 15336-15342

Yılser Devrim, Ayhan Albostan (2015), Enhancement of PEM fuel cell performance at higher temperatures and lower humidities by high performance membrane electrode assembly based on Nafion/zeolite membrane, International Journal of Hydrogen Energy, Volume 40, Issue 44, 15328-15335

Levent Bilir, Mehmet İmir, Yılser Devrim, Ayhan Albostan (2015), Seasonal and yearly wind speed distribution and wind power density analysis based on Weibull distribution function, International Journal of Hydrogen Energy , Volume 40, Issue 44, 15301-15310

Yılser Devrim, Kübra Pehlivanoğlu (2015), Design of a hybrid photovoltaic-electrolyzer-PEM fuel cell system for developing solar model, Phys. Status Solidi C, 1-6

EVCİ CELAL (2015), Thickness-dependent energy dissipation characteristics of laminated composites subjected to low velocity impact., Composite Structures, 133, pp. 508-521

Zeinali, S., Çetin, B., Oliaei, S. N. B., & Karpat, Y. (2015), Fabrication of continuous flow microfluidics device with 3D electrode structures for high throughput DEP applications using mechanical machining, Electrophoresis, 36(13), pp. 1432-1442

E. Oktay, H.U. Akay, O.T. Sehitoglu (2014), Three-dimensional Structural Topology Optimization of Aerial Vehicles Under Aerodynamic Loads, Computers and Fluids, 92, pp. 225-232

O. Özşahin, E. Budak, H. N. Özgüven (2014), In-Process Tool Point FRF Identification under Operational Conditions Using Inverse Stability Solution, International Journal of Machine Tools and Manufacture, 89, pp. 64-73

O. Özşahin, H.N. Özgüven, E. Budak (2014), Analytical modeling of asymmetric multi-segment rotor – bearing systems with Timoshenko beam model including gyroscopic moments, Computers & Structures, 144, pp. 119-126

Y. Devrim (2014), Preparation and testing of Nafion/titanium dioxide nanocomposite membrane electrode assembly by ultrasonic coating technique, Journal of Applied Polymer Science, 131, 40541

Yılser Devrim (2014), Fabrication and Performance Evaluation of Hybrid Membrane based on a Sulfonated Polyphenyl Sulfone/Phosphotungstic acid/Silica for Proton Exchange Membrane Fuel Cell at Low Humidity Conditions, Electrochimica Acta, 146, 741-751

EVCİ CELAL, IŞIK HALİL, DEĞİRMENCİ ERCAN (2014), Influence of welding wire selection on the strength and toughness of welded armor steel joints., Materials Testing, 56(10), pp. 812-817

EVCİ CELAL, GÜLGEÇ MÜFİT (2014), Effective damage mechanisms and performance evaluation of ceramic composite armors subjected to impact loading., Journal of Composite Materials, 48(26), pp. 3216-3236

Y. Devrim, S. Erkan, N. Baç, İ.Eroğlu (2013), Nafion/Titanium Silicon Oxides Nanocomposite Membranes for PEM Fuel Cells,, International Journal of Energy Research, 37, 435-442

Y. Devrim, S. Erkan, N. Baç, İ. Eroğlu (2013), Improvement of PEMFC performance with Nafion/Inorganic nanocomposite membrane electrode assembly prepared by ultrasonic coating technique, International Journal of Hydrogen Energy, 37, 16748-16758

D. Ergun, Y. Devrim, N. Baç, İ. Eroğlu, (2013), Phosphoric acid doped polybenzimidazole membrane for high temperature PEM fuel cell,, Journal of Applied Polymer Science, Special Issue: Membranes, 124, E267–E277

Kalajahi, M. H., Ahmadi, S. R., & Oliaei, S. N. B. (2013), Experimental and finite element analysis of EDM process and investigation of material removal rate by response surface methodology, The International Journal of Advanced Manufacturing Technology, 69(1-4), pp. 687-704.

Shabgard, M., Ahmadi, R., Seyedzavvar, M., & Oliaei, S. N. B. (2013), Mathematical and numerical modeling of the effect of input-parameters on the flushing efficiency of plasma channel in EDM process, International Journal of Machine Tools and Manufacture, 65, pp. 79-87.

Ö. Aslan, Lallit Anand, Shawn A. Chester (2012), A gradient theory for large deformation isotropic elastoplastic materials, International Journal of Plasticity, 30-31, 116-143

Mahmut Koyuncu, F. Yeşim İkikat, G. Canan İçöz, Besim Baranoğlu, Ali Yazıcı (2012), Implementation of a Parallel Dual Reciprocity Boundary Element Method for the Solution of Coupled Thermoelasticity and Thermoviscoelasticity Problems, CMES-Computer Modeling in Engineering & Sciences, 84, 13-26

G. Durkaya, A. Rastegar, H. Kurtuldu (2012), Effect of radiation exposure on the surface adhesion of Ru-capped MoSi multilayer blanks, PHOTOMASK TECHNOLOGY 2012, San Jose, California, 0277-786X

T. Sheps, J. Brocious, B. L. Corso, O. T. Gül, D. Whitmore, G. Durkaya, E. O. Potma, and P. G. Collins (2012), Four-wave mixing microscopy with electronic contrast of individual carbon nanotubes, Phys. Rev. B, 86, 235412

A.Rastegar, G. Durkaya, A. Cepler, S. Novak (2012), Effect of radiation on the defectivity and stability of Ru-capped MoSi multilayerblanks, EXTREME ULTRAVIOLET (EUV) LITHOGRAPHY III, San Jose, California, 8322, 832211

EVCİ CELAL, GÜLGEÇ MÜFİT (2012), An experimental investigation on the impact response of composite materials., International Journal of Impact Engineering, 43, pp. 40-51

E. Oktay, H.U. Akay, O. Merttopcuoğlu (2011), Parallelized Structural Topology Optimization and CFD Coupling for Design of Aircraft Wing Structures, Computers and Fluids, 49, pp. 141-145

C. Cigdemoglu, H.O. Arslan, H.U. Akay, (2011), A Phenomenological Study of Instructor's Experiences on an Open Source Learning Management System, Procedia - Social and Behavioral Sciences, 28, pp. 790-795

Ö. Aslan, N. Cordero, A. Gaubert, S. Forest (2011), The micromorphic approach to crystal plasticity and damage, International Journal of Engineering Science, 49, 1311-1325

Ö. Aslan, S. Quilici, S. Forest (2011), Numerical modeling of fatigue crack growth in single crystals based on microdamage theory, International Journal of Damage Mechanics, 20, 681-705

E. Billur, Y. Demiralp, A.R. Groseclose, T. Altan, B. Wadman (2011), Factors Affecting the Accuracy of Flow Stress Determined by the Bulge Test, Steel Research International, ICTP 2011 Special Edition, pp. 726-731

M. Koç, S. Mahabunphachai, E. Billur (2011), Forming characteristics of austenitic stainless steel sheet alloys under warm hydroforming conditions, Int. J. Adv. Manuf. Technol., Vol. 56, No: 1-4, pp. 97-113

M. Koç, E. Billur, Ö.N. Cora (2011), An experimental study on the comparative assessment of hydraulic bulge test analysis methods, Materials & Design , 32, pp 272-281

Shabgard, M., Oliaei, S. N. B., Seyedzavvar, M., & Najadebrahimi, A. (2011), Experimental investigation and 3D finite element prediction of the white layer thickness, heat affected zone, and surface roughness in EDM process, Journal of mechanical science and technology, 25(12), pp. 3173-3183.

Shabgard, M. R., Seyedzavvar, M., & Oliaei, S. N. B. (2011), Influence of input parameters on characteristics of EDM process, Strojniški vestnik-Journal of Mechanical Engineering, 57(9), pp. 689-696.

Shabgard, M. R., Seyedzavvar, M., Oliaei, S. N. B., & Ivanov, A. (2011), A numerical model for predicting depth of heat affected zone in EDM process for AISI H13 tool steel, Journal of Scientific & Industrial Research , 70, pp. 493-499

J. Liu, H.U. Akay, A. Ecer, R.U. Paylı (2010), Flow Around Moving Bodies Using a Dynamic Unstructured Overset-grid Method, International Journal of Computational Fluid Dynamics, Germany, 24,6, pp. 187-200

Bayka, D., Özdemir,A. (2010), Experimental Investigation Of Use Of Canola Oil As A Diesel Fuel, UMTIK 2010, 14th International Conference on Machine Design and Production

O. Özşahin, H. N. Özgüven, E. Budak (2010), Analysis and Compensation of Mass Loading Effect of Accelerometers on Tool Point FRF Measurements for Chatter Stability Predictions, International Journal of Machine Tools and Manufacture, 50, pp. 585-589

G. Durkaya, M. Buegler, M. Alevli, R. Atalay, I. Senavirathna, M. Kaiser, O. Hitzemann, A.Hoffmann, N. Dietz (2010), The influence of the group V/III molar precursor ratio on the structural properties of InGaN layers grown by HPCVD, Physica Status Solidi (a), 207(6), pp.1379-1382

Ö. Aslan, Samuel Forest (2009), Crack growth modeling in single crystals based on higher order continua, Computational Materials Science, 45, 756-761

Balku S, Yuceer M, Berber R (2009), Control vector parameterization approach in optimization of alternating aerobic-anoxic systems, OPTIMAL CONTROL APPLICATIONS & METHODS , 30, 573-578

Balku,S. (2009), Magnetic removal of iron from fireclays: optimum conditions, INDUSTRIAL CERAMICS , 29 (s), 83-89

O. Özşahin, A. Erturk, H. N. Özgüven and E. Budak (2009), A Closed-Form Approach for Identification of Dynamical Contact Parameters in Spindle-Holder-Tool Assemblies, International Journal of Machine Tools and Manufacture, 49, pp. 25-35

P. Lu, R. Collazo, R.F. Dalmau, G. Durkaya, N. Dietz, B. Raghothamachar, M. Dudley, Z. Sitar (2009), Seeded growth of AlN bulk crystals in m- and c-orientation, Journal of Crystal Growth , 312 58–63

Y. Devrim, S. Erkan, N. Baç, İ. Eroğlu (2009), Preparation and Characterization of Sulfonated Polysulfone/Titanium Dioxide Composite Membranes for Proton Exchange Membrane Fuel Cells, International Journal of Hydrogen Energy, 34, 3467-3475

B. Sarı, T. Şen, S.E. Kılıç (2008), Ahp model for the selection of partner companies in virtual enterprises, International Journal of Advanced Manufacturing Technology, 38, pp.367 - 376

P. Lu, R. Collazo, R. F. Dalmau, G. Durkaya, N. Dietz and Z. Sitar (2008), Different optical absorption edges in AlN bulk crystals grown in m- and c-orientations, Applied Physics Letters , 93(13) pp. 131922-3

N. Dietz, M. Alevli, R. Atalay, G. Durkaya, R. Collazo, J. Tweedie, S. Mita, and Z. Sitar, “ (2008), The influence of substrate polarity on the structural quality of InN layers grown by high-pressure chemical vapor deposition, Applied Physics Letters , 92(4) pp. 041911-3

M. Alevli, G. Durkaya, R. Atalay, R. Kirste, A. Weerasekara, A. G. U. Perera, A. Hoffmann and N. Dietz (2008), Optical characterization of InN layers grown by high-pressure chemical vapor deposition, Journal of Vacuum Science and Technology A, 26(4), pp. 1023-1026

Y. G. Devrim, (2008), Pyrolysis Kinetics of Blends of Yeni Çeltek Lignite, Energy Source, Part A, 238–246

Nadimi Bavil Oliaei , S., Khoushehmehr, R. J., Rohani, B., & Mostafapour, A. (2008), Investigation and analysis of weld induced residual stresses in two dissimilar pipes by finite element modeling, Journal of Applied sciences, 8(6), pp. 1014-1020.

Balku, S. (2007), Comparison between alternating aerobic anoxic and conventional activated sludge systems, Water Research , 41, 2220-2228

B. Sarı, S. Amaitik, S.E. Kılıç (2007), A Neural Network Model for the Assessment of Partners’ Performance in Virtual Enterprises, International Journal of Advanced Manufacturing Technology, 34, pp.816-825

B. Sarı, T. Şen, S.E. Kılıç (2007), Formation of Dynamic Virtual Enterprises and Enterprise Networks, International Journal of Advanced Manufacturing Technology, 34, pp.1246-1262

S.M. Amaitik, S.E. Kılıç (2007), An Intelligent Process Planning System for Prismatic Parts using STEP Features, International Journal of Advanced Manufacturing Technology, 31, pp. 978-993

Y.G. Devrim, Z. M.O. Rzaev, E. Pişkin, (2007), Physically and Chemically Cross-linked Poly (maleic anhydride-alt-styrene) -co- 2- acrylamido- 2-methyl- 1-propanesulfonic acid)/Poly(ethylene glycol) Proton-Exchange Membranes, Macromol. Chem. Phys, 208, 175–187

Y.G. Devrim, Z. M.O. Rzaev, E. Pişkin, (2007), Functionalization of Isotactic Polypropylene with Citraconic Anhydride,, Polymer Bulletin, 59, 447-456

Balku Ş., Berber R. (2006), Dynamics of an activated sludge process with nitrification and denitrification. Start_up simulation and optimizationusing evolutionary algorithm,, Computers and Chemical Engineering , 30, 490-499

S.M.Amaitik, T.T.Taşgın, S.E.Kılıç (2006), Tool-Life Modelling of Carbide and Ceramic Cutting Tools using Multi-Linear Regression Analysis, Proceedings of the Institution of Mechanical Engineers Part B-Journal of Engineering Manufacture, 220 (2), pp.129-136

Besim Baranoğlu, Yalçın Mengi (2006), The use of dual reciprocity boundary element method in coupled thermoviscoelasticity, Comput. Methods Appl. Mech. Eng., 196, pp.379-392

M. Alevli, G. Durkaya, V. Woods, U. Habeck, H. Kang, J. Senawiratne, M. Strassburg, I. T.Ferguson, A. Hoffmann, and N. Dietz (2006), Properties of InN grown by high-pressure CVD, GaN, AIN, InN and Related Materials, 892, ISBN: 1-55899-846-2, FF6.2,

M. Alevli, G. Durkaya, , A. Weerasekara, A.G.U. Perera, N. Dietz, W. Fenwick, V. Woods and I. Ferguson (2006), Characterization of InN layers grown by high-pressure chemical vapor deposition, Applied Physics Letters , 89, pp. 112119

Y.G. Devrim, Z. M.O. Rzaev, E. Pişkin, (2006), Synthesis and Characterization of Poly[((maleic anhydride)-alt-styrene)- co - (2-acrylamido-2-methyl-1-propanesulfonic acid)], Macromol. Chem. Phys., 207, 111–121

J. Koh, A.T. Hsu, H.U. Akay, M.F. Liou (2005), Analysis of Overall Heat Balance in Self-Heated Proton-Exchange-Membrane Fuel Cells for Temperature Predictions, Journal of Power Sources, 144, pp. 122-128

Bayka, D. (2005), Gasoline Engine With Low Emission And High Combustion Efficiency, 1st International Conference on Air Pollution and Combustion (CAPAC 2005)

S.M. Amaitik, S.E. Kılıç (2005), STEP-Based Feature Modeller for Computer-Aided Process Planning, International Journal of Production Research, 43, pp.3087-3101

Y.G. Devrim, Z. M.O. Rzaev, E. Pişkin, (2005), Physically and chemically crosslinked poly (maleic anhydride-alt-styrene-co-2-acrylamido-2-methyl-1-propane sulfonic acid)s as ion-exchange membranes, Eropean Polymer Congress, Moskow, Section 6.1.5. Ref. 2058

C.Saygın, S.E.Kılıç (2004), Dissimilarity Maximization Method for Real-time Routing of Parts in Random Flexible Manufacturing Systems, International Journal of Flexible Manufacturing Systems, 16, pp.169-182

O. Bilkay, Ö.Anlağan, S.E.Kılıç (2004), Job Shop Scheduling Using Fuzzy Logic, International Journal of Advanced Manufacturing Technology, 23, pp.606-619

H.Bil, S.E.Kılıç, A.E.Tekkaya (2004), A Comparison of Orthogonal Cutting Data from Experiments with Three Different Finite Element Models, International Journal of Machine Tools and Manufacture, 44, pp.933-944

N.Buyurgan, C.Saygın, S.E.Kılıç (2004), Tool Allocation in Flexible Manufacturing Systems with Tool Alternatives, Robotics and Computer Integrated Manufacturing, 20, pp.341-349

Y.G. Devrim, S. Eğri, Z. M.O. Rzaev, E. Pişkin, (2004), Comparison of Maleic Anhydride Grafting onto Powder and Granular Polypropylene in Melt by Reactive Extrusion, Journal of Applied Polymer Science, 92, 3675–3684

E. Oktay, H.U. Akay, A. Uzun (2003), A Parallelized 3D Unstructured Euler Solver for Unsteady Aerodynamics, AIAA Journal of Aircraft, 40,2, pp. 348-354

H.U. Akay, Y. Liu, M. Rassaian (2003), Simplification of Finite Element Models for Thermal Fatigue Life Prediction of PBGA Packages, ASME Journal of Electronic Packaging, 125, pp. 347-353

Y.Güldoğan, T.Durusoy and T.Bozdemir (2002), Effect of heating rate and particle size on pyrolysis kinetics of Gediz lignite, Energy Sources, 24, 753-760

E. Yılmaz, M.S. Kavsaoğlu, H.U. Akay, I.S. Akmandor (2001), Cell-vertex Based Parallel and Adaptive Explicit 3D Flow Solution on Unstructured Grids, International Journal of Computational Fluid Dynamics, 14, pp. 271-286

Y.P. Chien, A. Ecer, H.U. Akay, S. Secer, J.D. Chen (2001), Cost Estimation of Parallel CFD Using Variable Time-Stepping Algorithms, International Journal of Computational Fluid Dynamics, 15, pp. 183-195

S. Kocak, H.U. Akay (2001), Parallel Schur Complement Method for Large-Scale Systems on Distributed Memory Computers, Journal of Applied Mathematical Modeling, 19, pp. 873-886

Y.Güldoğan, V. Evren, T.Durusoy and T.Bozdemir (2001), Effects of heating rate and particle size on the pyrolysis kinetics of Mengen lignite, Energy Sources, 23, 377-344

Y.Güldoğan, T.Bozdemir, T.Durusoy (2001), Pyrolysis kinetics of blends of Gediz lignite with Denizli peat, Energy Sources, 23, 393-400

Y.Güldoğan, T.Durusoy and T.Bozdemir (2001), Pyrolysis kinetics of blends of Mengen lignite with Denizli peat, Energy Sources, 23, 59-65

A. Ecer, N. Gopalaswamy, H.U. Akay, Y.P. Chien (2000), Digital Filtering Techniques for Parallel Computation of Explicit Schemes, International Journal of Computational Fluid Dynamics, 13, pp. 211-222

Y.P. Chien, A. Ecer, H.U. Akay, S. Secer, R. Blech (2000), Communication Cost Estimation for Parallel CFD Using Variable Time-Stepping Algorithms, Computer Methods in Applied Mechanics and Engineering, 19, pp. 1379-1389

Y.Güldoğan, T.Durusoy and T.Bozdemir (2000), Effect of heating rate on pyrolysis kinetics of Tunçbilek lignite, Energy Sources, 22, 305-312

Y.Güldoğan, T.Durusoy and T.Bozdemir (1999), Pyrolysis kinetics of blends of Tunçbilek lignite with Denizli peat, Thermochimica Acta, 75-81

H.U. Akay, A. Ecer, K. Fekete (1998), A Semi-Explicit Parallel Flow Solver for Viscous Incompressible Flows, Computer Methods in Applied Mechanics and Engineering, 151, pp. 1-12

N. Gopalaswamy, A. Ecer, H.U. Akay, Y.P. Chien (1998), Efficient Parallel Communication Schemes for Explicit CFD Solvers, AIAA Journal, pp. 961-967

N. Gopalaswamy, H.U. Akay, A. Ecer, and Y.P. Chien (1997), Parallelization and Dynamic Load Balancing of NPARC Codes, AIAA Journal, 35, pp. 1806-1812

W.J. Mascarenhas, H.U. Akay, and M.J. Pikal, (1997), A Computational Model for Finite Element Analysis of the Freeze-Drying Process, Computer Methods in Applied Mechanics and Engineering, 148, pp. 105-124

Bayka, D. (1993), A Simulation Model For Calculating The Flame Propagation And Spatial Gas Composition In Spark Ignition Engines, Modelling, Measurement & Control, AMSE Press

S.E.Kılıç, C. Çoğun, D.T.Şen (1993), A Computer-Aided Graphical Technique for the Optimization of Machining Conditions, Computers in Industry, 22, pp. 319-326

Bayka, D. (1992), Performance And Emission Characteristics Of Diesel Engines With CNG And Pilot Injection, International Journal Of Energy - Environment - Economics

Bayka, D. (1992), Use Of Natural Gas In Motor Vehicles, International Journal Of Natural Gas Technology And Piping

Bayka, D. (1990), Improvement Of The Performance Of A Single Cylinder Spark Ignition Engine By Operational Factors, Journal Of Thermal Science And Technology

S.E.Kılıç (1983), Optimization of Cutting Conditions for Multi-Pass Turning Operations, J. Pure and Applied Sciences, 16, pp.21-39

M.Burdekin, S.E.Kılıç (1982), The Measurement of Dynamic Cutting Force Data and Its Application to the Prediction of Chatter, J.Mech.Eng.Science, 24, pp. 139-145

Bayka, D. (1981), Instantaneous Heat Transfer in a Single Stroke Rapid Compression Machine, METU, Journal of Pure and Applied Sciences

Other Refereed Journals

EVCİ CELAL, UYANDIRAN İBRAHİM (2017), The effect of the impactor diameter and temperature on low velocity impact behavior of CFRP laminates, American Institute of Physics-AIP Conference Proceedings 1809

KURT SUAT, EVCİ CELAL, IŞIK HALİL, IŞIK MEHMET SAMİR (2016), Farklı Kaynak Ağız Açılarının 307Si Elektrotuyla Kaynak Edilmiş Mıl-A 46100 Zırh Çeliğinin Mekanik Özelliklerine Etkisinin İncelenmesi, Çukurova Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi, 31, pp. 155-162

YILMAZ UMUT, EVCİ CELAL (2015), Havacılık ve Savunma Sektöründe Kompozit Malzemelerin Geleceği., The Journal of Defense Sciences, 14(2), pp. 77-109

Oliaei, S. N. B., Özdemir, C., & Karpat, Y. (2014), On-machine fabrication of PCD and WC micro end mills using micro electro discharge machining, International Journal of Mechatronics and Manufacturing Systems, 7(4-6), pp. 246-264

IŞIK HALİL, DEĞİRMENCİ ERCAN, EVCİ CELAL (2013), Örgülü Kumaşların Balistik Darbe Enerji Sönümleme Mekanizmalarının İncelenmesi., The Journal of Defense Sciences, 12(2), pp. 145-162

H.U. Akay, N. Nayan, W.V. Bell, G.L. Troyer, R.E. Dukes, P. Mohan (2007), CFD Modeling of Pharmaceutical Isolators with Experimental Verification of Airflow, PDA Journal of Pharmaceutical Science and Technology, pp. 237-254

Bayka, D., (2007), Doğal Gazın Taşıtlarda Yakıt Olarak Kullanımı, Doğal Gazın Taşıtlarda Yakıt Olarak Kullanımı, ankara, 1, pp

Bayka, D. (2007), Doğal Gazın Taşıtlarda Yakıt Olarak Kullanımı, LPG-CNG Kongresi, Makina Mühendisleri Odası

H.U. Akay, R.M. Pidaparti, P.W. Longest, A.T. Hsu (2005), Nanoscale Computational Analysis for an Idealized Bio-Molecular Motor, Bulletin of the Polish Academy of Sciences, Technical Sciences, 53,4, pp. 26-44

M. Pikal, S. Chen, H.U. Akay (2005), Glass Transition Models in Freeze Drying, Pharmaceutical Development and Technology, 10, pp. 17-32

H.U. Akay, N.H. Paydar, G. Glogas, H. Zhang (1998), Viscoelastic Study of a Conductive Adhesive for Electronic Packages - Part 1: Experimental Determination of Material Properties, International Journal of Microelectronic Packaging, 1, 217-224

H.U. Akay, N.H. Paydar, G. Glogas, H. Zhang (1998), Viscoelastic Study of a Conductive Adhesive for Electronic Packages - Part 2: Thermal Stress Analysis Using the Finite Element Method, İnternational Journal of Microelectronic Packaging, 1, 225-233

International Conference Proceedings

Bahram Lotfi Sadigh, Samad Nadimi Bavil Oliaei, Samad Dadvandipour (2017), An Ontology Based Semantic Machine Tool Selection for Multi Scale Wire EDM Processes, Solid State Phenomena, Athens, Greece, pp. 470-477

Samad Nadimi Bavil Oliaei, Mahmoudreza Eivazzadeh, Samad Dadvandipour (2017), Finite Element Modeling of Incremental Sheet Metal Forming of Aluminum Alloy Al 1100, XIV INTERNATIONAL CONGRESS SUMMER SESSION “MACHINЕS.TECHNOLОGIES.MATERIALS” , VARNA, BULGARIA, pp. 254-257

E. Billur, B. Çetin, R.O. Uğuz, K. Davut, E. Arslan (2016), Advanced Material Characterization of TWIP Steels, in proceedings of New Developments in Sheet Metal Forming 2016 (NEBU 2016), Stuttgart, Germany, pp 303-318

E. Billur, G. Durkaya, B. Çetin, M.M. Yılmaz, A. Atay, A.G. Oğuz, O. Onaylı, U.C. Yalazı, E. Kılcı, (2016), Investigation of The Effect of Servo-Press Forming in Springback and Minimum Bending Radii of Ultra High Strength Steels, 17th International Conference On Machine Design And Production (UMTIK 2016), Bursa, Turkey

EVCİ CELAL, UYANDIRAN İBRAHİM (2016), The Effect of the Impactor Diameter and Temperature on Low Velocity Impact Behavior of CFRP Laminates., 6th International Advances in Applied Physics and Materials Science Congress & Exhibition

EVCİ CELAL, IŞIK HALİL, MACAR MEHMET (2016), An Investigation on Mechanical Properties of Welded Armor Plates Based on Groove Geometry and Heat Transfer., 4th International Conference on Welding Technologies and Exhibition (ICWET’16)

KURT SUAT, EVCİ CELAL, IŞIK HALİL, IŞIK SAMİR (2016), “Farklı kaynak ağız açılarının 307Si elektrotuyla kaynak edilmiş Mil-A 46100 zırh çeliğinin mekanik özelliklerine etkisinin incelenmesi”, 4th International Conference on Welding Technologies and Exhibition (ICWET’16)

Oliaei, S. N. B., & Karpat, Y. (2016), Fabrication of PCD Mechanical Planarization Tools by using μ-Wire Electrical Discharge Machining, Procedia CIRP, 46, pp. 311-316, (ISEM XVIII-Tokyo, JAPAN).

Oliaei, S. N. B., Karpat Y., (2016), Influence of WEDM Strategies on Surface Roughness of Tungsten Carbide, The 17th International Conference on Machine Design and Production, Bursa, TURKEY.

Oliaei, S. N. B., Kanlı, M., Karpat, Y., (2016), Mechanistic Modeling of Micro Milling Including Tool Run-Out, 7th International Symposium On Machining, Marmara University, Istanbul, TURKEY.

H.U. Akay, E. Oktay, M. Manguoglu, A.A. Sivas (2015), Improved Parallel Preconditioners for Multiphysics Topology Optimizations, 27th International Conference on Parallel Computational Fluid Dynamics, Montreal, Canada, 174-176

Farid Saeidi, Mertcan Kurt, Tansel Deniz, Ercan Gürses (2015), 3D Numerical Simulation of Non-Energetic Reactive Armor, 8th Ankara International Aerospace Conference, Ankara

O. Özşahin, E. Budak, H. N. Özgüven (2015), Investigating Dynamics of Machine Tool Spindles under Operational Conditions, Proceedings of the 13th CIRP Conference on Modeling of Machining Operations, Sintra

E. Billur, H. Porzner, D. Lorenz, M. Holecek, M. Vrojlik, M. Hoss, B. Damenha, J. Friberg, C. Koroschetz , M. Skrikerud (2015), From Concept to Virtual Reality: Virtual Hot Forming Engineering, Proceedings of 5th International Conference on Hot Sheet Metal Forming (chs2 - 2015), Toronto, ON, Canada, pp 463-470

E. Billur, B. Çetin, M.M. Yılmaz, A.G. Oğuz, A. Atay, K. Ersoy, R.O. Uğuz, B. Kaftanoğlu (2015), Forming of New Generation AHSS Using Servo Presses, Proceedings of 5th International Conference on Accuracy in Forming Technology (ICAFT 2015), Chemnitz, Germany, pp 175-191.

Tomaz Pepelnjak, Besim Baranoğlu, Erdem Kayhan, Bilgin Kaftanoğlu (2015), Numerical Simulation of the Deep Drawing Process with Local Heating at the Flange Region, 7th International Conference and Exhibition on Design and Production of Machines and Dies/Molds, Kuşadası-Aydın, Türkiye

Mehmet S. Solmaz, Barbaros Çetin, Besim Baranoğlu, Murat Serhatlıoğlu, Necmi Bıyıklı (2015), Boundary Element Method for optical force calibration in microfluidic dual-beam optical trap, SPIE--Optical Trapping and Optical Micromanipulation XII, San Diego, CA, USA

EVCİ CELAL (2015), “Impact Resistance Characteristics of Fiber Reinforced Polymer Composites”, International Seminar in Greener and Safer Energetic and Ballistic Systems-ENSTA Bretagne

MACAR MEHMET, EVCİ CELAL, YILDIRIM RAİF ORHAN, VURAL MURAT (2015), “Adiabatic Shear Band Formation in Aluminum Alloys”, International Seminar in Greener and Safer Energetic and Ballistic Systems-ENSTA Bretagne

YILMAZ NADİR, DEĞİRMENCİ ERCAN, EVCİ CELAL, MACAR MEHMET, IŞIK HALİL (2015), “Effects of Gun Propellant Grain Shape and Combustion Characteristics on Internal Ballistics”, 13th International Combustion Symposium

YILMAZ NADİR, DEĞİRMENCİ ERCAN, IŞIK HALİL, EVCİ CELAL, MACAR MEHMET (2015), “Thermo Mechanical Modeling of Double Base Propellant Combustion and Experimental Validation”, 13th International Combustion Symposium

Oliaei, S. N. B., Karpat Y. (2015), An Investigation of Ductile Regime Machining of Fused Silica Glass Using PCD Micro Tools, 8th International Conference and Exhibition on Design and Production of Machines and Dies/Molds, Kuşadası/Aydin, TURKEY.

S. Forest, D. Colas, S. Flouriot, O. Aslan (2014), Fatigue Crack Initiation and Propagation in Metal Single and Poly, 11th World Congress on Computational Mechanics, WCCM XI, Barcelona

O. Aslan (2014), Numerical modeling of Hydrogen diffusion in metals accounting for large deformations, 4TH INTERNATIONAL CONFERENCE ON NUCLEAR AND RENEWABLE ENERGY RESOURCES, NURER 2014, Antalya

B. Lotfi Sadigh, F. Arikan, A.M. Özbayoğlu, H.Ö. Ünver, S.E. Kılıç (2014), A Multi-Agent System Model for Company Selection Process in an Ontology-based Virtual Enterprise, Complex Adaptive Systems, Publication 4, Conference Organized by Missouri University of Science and Technology, Philadelphia, PA, USA

T.Ç. Gümüş, H. Christoph, D. Hengevoss, S.E. Kılıç, G. Massard, M. Özbayoğlu, H.Ö. Ünver (2014), Conceptualization of a Web-based Software Platform that Enables Cleaner Production and Industrial Symbiosis, Proceedings of the 16th International Machine Design and Production Conference, İzmir, Turkey, pp. 571-577

B. Lotfi Sadigh, H.Ö. Unver, E. Doğdu, S.E. Kılıç (2014), Ontology Based Virtual Enterprise System Domain Modeling, FAIM 2014, San Antonio, pp. 133-142

E. Billur (2014), Producing Ultra High Strength Automotive Components: Hot Stamping of Boron Alloyed Steels vs. Cold Stamping of New Generation Steels, 2nd International Metal Forming Conference (MetForm 2014), Ankara, Turkey

E. Billur, C. Wang, C. Bloor, M. Holecek, H. Porzner, T. Altan (2014), Advancements in Tailored Hot Stamping Simulations: Cooling Channel and Distortion Analyses, The 9th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes (NUMISHEET 2014), Melbourne, Australia, AIP Conference Proceedings, Vol. 1567 , pp. 1079-1084

M. Emin Tamer, Omer Music, Besim Baranoğlu, İzzet Özdemir, Ali Sakin, İsmail Durgun (2014), Numerical and Experimental Investigation of Incremental Sheet Forming, 2nd International Conference on Metal Forming (METFORM-2014), Ankara, Türkiye

Besim Baranoğlu, Barbaros Çetin (2014), A particle flow specific boundary element formulation for microfluidic applications, 4th Micro and Nano Flows Conference, Londra, İngiltere

M. Emin Tamer, Omer Music, İzzet Özdemir, Besim Baranoğlu, Ali Sakin, İsmail Durgun (2014), Finite element analysis of incremental sheet metal forming with successive tool paths for use in prototype manufacturing of car body components, World Congress on Computational Methods XI, Barcelona, İspanya

Nezih Eren Mumcu, Besim Baranoğlu, Feridun Özhan (2014), Finite Element Simulation of the Hot Forging Operation in Manufacturing of Bearing Rings with Special Emphasis on Manufacturing Speed, World Congress on Computational Methods XI, Barcelona, İspanya

Besim Baranoğlu, Barbaros Çetin (2014), Parallel implementation of 2-D boundary element formulation for a microfluidic particulate flow, World Congress on Computational Methods XI, Barcelona, İspanya

Oliaei, S. N. B., & Karpat, Y. (2014), Experimental investigations on micro milling of Stavax stainless steel, Procedia CIRP, 14, pp. 377-382, ( HPC2014-California, USA).

Ö. Aslan, D. Zhang (2013), Material Point Method for Large Deformation Plasticity and Failure, 12th U.S. National Congress on Computational Mechanics, USNCCM12 , Raleigh, North Carolina

O. Aslan, D. Zhang (2013), Material Point Method for Finite Strain Plasticity and Cavitation problems, 23rd International Workshop on Computaional Mechanics of Materials, IWCMM23, Singapore

M.U. Uluer, H.Ö. Ünver, K. Akkuş, S.E. Kılıç (2013), A Model for Predicting Theoretical Process Energy Consumption of Rotational Parts Using STEP AP224 Features, Proceedings of the 20th CIRP International Conference on Life Cycle Engineering, Singapore, pp. 141-146

E. Billur, A. Groseclose, T. Mao, T. Altan (2013), Current Applications of FE Simulation for Blanking and Stamping of Sheet Materials, Tools and Technologies for Processing Ultra High Strength Steels, Graz, Austria, pp 221-238

E. Billur, H. Porzner, T. Altan (2013), Virtual Prototyping of Lightweight Designs Made with Cold and Hot Formed Tailored Solutions, 2nd World Congress on Integrated Computational Materials Engineering (ICME 2013), Salt Lake City, UT, USA, pp 49-54

T. Altan, A. Groseclose, E. Billur, S. Subramonian, T. Mao (2013), Advances and Challenges in Sheet Metal Forming Technology, 7th International Conference on Design and Production of Machines and Dies/Molds, Antalya, Turkey, pp 1-6

R. Perez-Santiago, E. Billur, A. Ademaj, C. Sarmiento, R. Berlanga, T. Altan (2013), Hot Stamping of a B-Pillar with Tailored Properties: Experiments and Preliminary Simulation Results, 4th International Conference on Hot Sheet Metal Forming (chs2 - 2013), Luleå, Sweden, pp 83-90

E. Billur, H. Porzner, M. Holecek, T. Altan (2013), Virtual Prototyping of Hot Formed Tailored Light-weight Designs, 4th International Conference on Hot Sheet Metal Forming (chs2 - 2013), Luleå, Sweden, pp 303-310

T. Altan, E. Billur, H. Porzner, D. Dooge, Y. Vincent, H. Porzner (2013), Concurrent Engineering with Hot and Cold Formed Tailored Solutions, International Automotive Body Congress (IABC 2013), Frankfurt, Germany, pp 91-112

M. Emin Tamer, Omer Music, İzzet Özdemir, Besim Baranoğlu, Ali Sakin, İsmail Durgun (2013), Simulation for Incremental Sheet Forming Process: a Comparison of Implicit and Explicit Finite Element Analysis with Experimental Data, 7th International Conference and Exhibition on Design and Production of Machines and Dies/Molds, Antalya, Türkiye

Besim Baranoğlu, Elif Aydın, Şeyma Tütüncü, K. Yiğit Kocaman (2013), Electromagnetic Bulging: A Sheet Metal Forming Process Using Electromagnetic Field, 7th International Conference and Exhibition on Design and Production of Machines and Dies/Molds, Antalya, Türkiye

Besim Baranoğlu (2013), Solution of coupled linear thermoviscoelasticity problems with dual reciprocity boundary element method (DRBEM): A comparison of direct and iterative solutions, SEECCM13 III South-East European Conference on computational mechanics, Kos, Yunanistan

Elif Aydın, Besim Baranoğlu (2013), Encouraging engineering students in collaborative research projects, 2nd International Engineering Education Conference, Antalya, Türkiye

Y.Devrim, O. Capar, G.Ozcetin, I.Eroglu, H. Devrim (2013), Design, Fabrication and Performance Evaluation of a 500W PEMFC Stack, he Fifth World Hydrogen Technologies Convention (WHTC2013), China, S033

Oliaei, S. N.B., Özdemir, C., Karpat, Y. (2013), Fabrication of Micro Ball End Mills Using Micro Electro Discharge Machining (μ-EDM), 7th International Conference and Exhibition on Design and Production of Machines and Dies/Molds, Antalya, TURKEY.

Erdal Oktay, H.U. Akay (2012), Structural Topology Optimization Under Aerodynamic Loads Using PETSc as a Parallel Solver, Int. Conf. on Parallel Computational Fluid Dynamics, Atlanta, Georgia, 12

Ceyhan Çiğdemoğlu, H.U. Akay (2012), Changes in the Experiences of Instructors on the Use of a Learning Management System, Proceedings of the 2nd International Engineering Education Conference, Antalya, Turkey, pp. 149-154

H.U. Akay, Abdulkadir Erden (2012), A Team-Based Undergraduate Research Projects Program, Proceedings of the 2nd International Conference on Engineering Education, Antalya, Turkey, pp. 357-363

B. Baranoglu, M.E. Tamer, A. Sakin, I. Durgun, O. Music, H.U. Akay (2012), Industry Funded Undergraduate Research Projects as a New Method for Industry-University Cooperation: The Example of Tofas-Atilim University Joint Project on Incremental Forming, Proceedings of the 2nd International Conference on Engineering Education, pp. 327-333

Ö. Aslan (2012), A Large-Deformation Gradient Damage Model for Single Crystals Based on Microdamage theory, 22nd International Workshop on Computaional Mechanics of Materials, IWCMM22, Baltimore, USA

Masoud L. Navid, Babak Rouhani, Farid Saeidi, Matin Ghaziani (2012), A Hydraulic Strategy Design for Modeling and Simulation of A Mold Oscillation System, The 15th International Conference on Machine Design and Production, Pamukkale, Denizli

K. Akkuş, S.E. Kılıç (2012), STEP AP224 Based Feature Modeller with Automatic NC-Code Generation for Rotational Parts, Proceedings of the 15th International Machine Design and Production Conference, Pamukkale,Denizli, Turkey, pp. 763-777

M.U. Uluer, H.Ö. Ünver, S.E. Kılıç (2012), An Eco-Tracking System for Environmentally Conscious Manufacturing, Proceedings of the 15th International Machine Design and Production Conference, Pamukkale, Denizli, Turkey, pp. 845-855

B. Lotfi Sadigh, H.Ö. Ünver, E. Doğdu, S.E. Kılıç (2012), An Ontology Based Model for Virtual Enterprise, Proceedings of the 15th International Machine Design and Production Conference, Pamukkale, Denizli, Turkey, pp. 885-891

O. Özşahin, E. Budak, H. N. Özgüven (2012), Analytical Modeling of the Machine Tool Spindle Dynamics under Operational Conditions, Proceedings of the – 37th MATADOR Conference, Manchester

Besim Baranoğlu, M. Emin Tamer, İzzet Özdemir, Omer Music, Ali Sakin, İsmail Durgun, Hasan U. Akay (2012), Industry funded undergraduate research projects as a new method for industry-university cooperation: The example of TOFAS-Atilim University joint project on incremental forming, 2nd International Engineering Education Conference, Antalya, Türkiye

Oliaei, S. N.B., Karpat, Y. (2012), Multi-scale Milling Force Modeling through a Finite Element Simulation Based Metamodel, 15th International Conference on Machine Design and Production, Pamukkale, Denizli, TURKEY.

Ergür A., Oliaei, S.N.B., Karpat, Y., (2012), Design and Fabrication of Micro Cutting Tools Using Micro Electro Discharge Machining (µ-EDM), 15th International Conference on Machine Design and Production, Denizli, TURKEY.

Ö. Aslan, Lallıt Anand (2011), A gradient theory for large-deformation isotropic elastic-plastic materials, 2nd International Conference on Material Modeling, ICMM2, Paris, France,

Ö. Aslan, Lallit Anand (2011), A fully coupled thermo-mechanical model for hydrogen diffusion in metals accounting for large elastoviscoplastic deformations, 11th US National Congress on Computational Mechanics, USNCCM11, Minneapolis, Minnesota, USA,

M.U. Uluer, G. Gök, H.Ö. Ünver, S.E. Kılıç (2011), Towards a Decision Support Framework for Sustainable Manufacturing, Proceedings of the 9th Global Conference on Sustainable Manufacturing, Saint Petersburg, Russia, pp. 88-93

B. Lotfi Sadigh, H.Ö. Ünver, S.E. Kılıç (2011), Design of a Multi Agent Based Virtual Enterprise Framework for Sustainable Production, Proceedings of the 1st International Conference on Virtual and Networked Organizations Emergent Technologies and Tools, Ofir, Portugal, pp. 186-195

M. Shah, E. Billur, P. Sartkulvanich, J. Carsley, T. Altan (2011), Cold and warm hydroforming of AA5754-O Sheet: FE Simulations and Experiments, The 8th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes (NUMISHEET 2011), Seoul, S. Korea, AIP Conference Proceedings, Vol. 1383, pp 690-697

Besim Baranoğlu, Mahmut Koyuncu, F. Yeşim İkikat, G. Canan İçöz, Ali Yazıcı (2011), Implementation of a parallel dual reciprocity boundary element method for the solution of coupled thermoelasticity and thermoviscoelasticity problems, ICCESMM, Zonguldak, Turkiye

Celal Onur Alkaş, Ceren Merve Karakaş, Celalettin Karadoğan, Besim Baranoğlu (2011), Design, analysis and improvements of aluminum cold forging process, 6th International Conference and Exhibition on Design and Production of Machines and Dies/Molds, Ankara, Türkiye

Y. Devrim, N. Baç, İ. Eroğlu (2011), Nanocomposite membranes based on nafion and TiSiO4 nanoparticle, European Polymer Congress 2011 XII Congress of the Specialized Group of Polymers, Spain, T4-02

H.U. Akay (2010), The Need for Simulation-­Based Engineering and Science Emphasis in Engineering Education, Proceedings of the International Engineering Education Conference, Antalya, Turkey, pp. 4-5

H.U. Akay, E. Oktay, O. Merttopcuoğlu, C. Şener (2010), Parallelized Structural Topology Optimization and CFD Coupling for Design of Aircraft Structures, Int. Conf. on Parallel Computational Fluid Dynamics, Kaohsiung, Taiwan, pp. 32-35

Ö. Aslan, Samuel Forest (2010), Microdamage approach to crystal plasticity with application to fatigue crack growth, ", EUROMECH colloquium 505 "Multiscale effects in fatigue of metals", Palaiseau, France

Bayka, D. (2010), Experimental Investigation Of Use Of Canola Oil As A Diesel Fuel, UMTIK 2010, 14th International Conference on Machine Design and Production

T. Fidan, Ö. Ünver, S.E. Kılıç (2010), A Conceptual Study on Responsive and Reconfigurable Agent Based Product Development System, Proceedings of the 14th International Machine Design and Production Conference, Güzelyurt, Turkish Republic of Northern Cyprus, pp. 559-569

T. Fidan, Ö. Ünver, S.E. Kılıç (2010), A Collaboration Framework for Product Data Management and Exchange Based on Open Standards and SOA, Proceedings of the 14th International Machine Design and Production Conference, Güzelyurt, Turkish Republic of Northern Cyprus, pp.539-557

E. Billur, T. Altan (2010), Challenges in Forming Advanced High Strength Steels, New Developments in Sheet Metal Forming 2010, Stuttgart, Germany, pp 285-304

Besim Baranoğlu, İsmail Bircan (2010), The example of Metal Forming Center of Excellence / Üniversite-Sanayi iĢbirliğinde yeni yaklaĢımlar: Atılım Üniversitesi Metal ġekillendirme Mükemmeliyet Merkezi Örneği, International Engineering Education Conference, Antalya, Türkiye

G. Durkaya, M. Alevli, M. Buegler, R. Atalay, S. Gamage, M. Kaiser, R. Kirste, A. Hoffmann, M. Jamil, I. Ferguson and N. Dietz (2010), The effects of V/III molar ratio on structural properties of In65Ga35N layers grown by HPCVD, MRS Symposium Proc, San Francisco, California, 1202, paper# 1202-I05-21

Y. Devrim, S. Erkan, N. Baç, İ. Eroğlu (2010), Nafion/Mixed Inorganic Oxide Nanocomposite Membranes for PEM Fuel Cells, International Conference on Clean Energy (ICCI-2010), Cyprus

Y. Devrim, S. Erkan, N. Baç, İ. Eroğlu (2010), Preparation and Characterization of Nafion/Titanium Dioxide Nanocomposite Membranes for Proton Exchange Membrane Fuel Cells, WHEC 2010, Germany

D. Ergun, Y. Devrim, N. Baç, İ. Eroğlu, (2010), High Temperature Proton Exchange Membrane Fuel Cells, WHEC 2010, Germany

Y. Devrim, S. Erkan, N. Baç, İ. Eroğlu (2010), Nanocomposite Membranes based on Nafion and TiO2 for PEM Fuel Cells,, 6th Chemical Engineering Conference for Collaborative Research in Eastern Mediterranean Countries (EMCC-6), Turkey

Y. Devrim, S. Erkan, N. Baç, İ. Eroğlu (2010), Preparation and Characterization of Sulfonated Polysulfone/TiO2 Composite Membranes for Proton Exchange Membrane Fuel Cell, 5th Chemical Engineering Conference for Collaborative Research in Eastern Mediterranean Countries, EMCC5 ., Turkey, A22

H.U. Akay, R. Paylı, J. Liu, A. Ecer (2009), An Overset Unstructured Grid Method for Parallel Solvers, Int. Conf. on Parallel Computational Fluid Dynamics Conference, Moffett Field, CA, 81-88

Ö. Aslan, Samuel Forest (2009), Generalized continuum modeling of crack propagation in single crystals under fatigue, 1st International Conference on Material Modeling, ICMM1, Dortmund, Germany

Ö. Aslan, Samuel Forest (2009), Numerical Modeling of Fatigue Crack Growth in Single Crystals Based on Microdamage Theory, 10th International Conference on Computational Plasticity Fundamentals and Applications, COMPLAS-X, Barcelona, Spain

Ö. Aslan, Samuel Forest (2009), Crack Growth Modeling in Single Crystals based on Microdamage Continuum, 12th International Conference on Fracture, ICF-12, Ottawa, Canada

O. Özşahin, H. N. Özgüven, E. Budak (2009), Mass Loading Effect of Accelerometers on Tool Point FRF and Stability Diagrams, Proceedings of the 12th CIRP Conference on Modeling of Machining Operations, San Sebastian

E. Billur, S. Mahabunphachai, M. Koç (2009), Formability of Austenitic Stainless Steels under warm hydroforming conditions, Transactions of NAMRI/SME, Clemson, SC, USA, Vol. 37, pp 341-348

Besim Baranoğlu, Erkan Önder, Celal Soyarslan, Mahmut Şenaltun, A. Erman Tekkaya (2009), Springback Estimation of an Automobile Part: Comparison of Numerical Simulations with Experimental Results, 5th International Conference and Exhibition on Design and Production of Machines and Dies/Molds, Kuşadası-Aydın, Türkiye

M. Buegler, M. Alevli, R. Atalay, G. Durkaya, I. Senevirathna, M. Jamil, I. Ferguson, and N. Dietz (2009), Optical and structural properties of InN grown by HPCVD, Proc. of SPIE, , San Diego, California, Vol. 7422 pp.742218-1-6

D. Ergun, Y. Devrim, N. Baç, İ. Eroğlu, (2009), High Temperature Proton Exchange Membrane Fuel Cell, HYPOTHESIS VIII, Portugal

K.J. Wilson, H.U. Akay (2008), IUPUI Multidisciplinary Undergradute Research Institute, The 12th Council of Undergraduate Research National Conference, St. Joseph, Minnesota, pp. 9-10

Ö. Aslan, Samuel Forest (2008), Fatigue crack growth modeling in single crystals based on higher-order continua, 6th International Conference on Low Cycle Fatigue, LCF-6, Berlin, Germany

Ö. Aslan, Samuel Forest (2008), Crack growth modeling in single crystals based on higher-order continua, 18th International Symposium on Computational Mechanics of Materials, IWCMM-18

O. Özşahin, H. N. Özgüven, E. Budak (2008), Estimation Of Dynamic Contact Parameters For Machine Tool Spindle-Holder-Tool Assemblies Using Artificial Neural Networks, Proceedings of the 3rd CIRP International Conference on Manufacturing Engineering (ICMEN), Kassandra

E. Billur, M. Koç (2008), A comparative study on hydraulic bulge testing and analysis methods, ASME Conf. Proc., Manufacturing Science and Engineering Conference (MSEC 2008), Evanston, IL, USA, pp 59-65

J. Chen, H.U. Akay (2007), Capstone Design Course: A Bridge to the Real World Engineering, National Capstone Design Course Conference, Boulder, Colorado, pp. 25-30

G.M. Malacinski, H. Yokota, H.U. Akay (2007), Integrating the Traditionally Trained Mechanical Engineer (Problem-Solver) into Modern Medical Research Projects, Proceedings of the Spring 2007 American Society for Engineering Education, Inidanapolis, Indiana, pp. 55-61

Ö. Aslan, Samuel Forest (2007), Regularization of crack growth modeling based on micromorphic continua, International Union of Theoretical and Applied Mechanics Symposium, IUTAM, , Netherlands,

E. Özlü, O. Özşahin, H.N. Özgüven, E. Budak (2007), The Use of Noise Measurement in Machining Stability Analysis,, The 36th International Congress and Exhibition on Noise Control Engineering, İstanbul

Besim Baranoğlu (2007), "Exact and non-singular integration in the BEM using 2-D discontinuous quadratic elements for Laplace Equation, CMM2007 17th International Conference on Computer Methods in Mechanics, Lodz-Spala, Polonya

M. Alevli, G. Durkaya, R. Kirste, A. Weesekara, W. E. Fenwick, V. T. Woods, I. T. Ferguson, A. Hoffmann, A.G.U. Perera and N. Dietz (2007), Properties of InN layers grown by High Pressure CVD, MRS Symposium Proc. , Warrendale, Pennsylvania , 955E, Paper# 0955-I08-04, pp.1-6

Besim Baranoğlu, Yalçın Mengi (2006), On the Use of Iterative Dual Reciprocity Boundary Element Method on Coupled Thermoviscoelasticity, 35th Solid Mechanics Conferance, Krakow, Polonya

Bayka, D., Mehdiyev,R.,Wolanski,P.,Güdü,T.,Arslan, H. (2005), Gasoline Engine With Low Emission And High Combustion Efficiency, 1st International Conference on Air Pollution and Combustion (CAPAC 2005), ankara, 1, pp

Bayka, D., Karel, A.,Çakar,D. (2005), Operation Of A Spark Ignition Engine With Superheated Fuel Vapor, The 18th Internal Combustion Engine Symposium, Society Of Automotive Engineers Of Japan, South Korea, 1, pp

Bayka, D. (2005), Operation Of A Spark Ignition Engine With Superheated Fuel Vapor, The 18th Internal Combustion Engine Symposium, Society Of Automotive Engineers Of Japan

Y.G. Devrim, Z. M.O. Rzaev, E. Pişkin, (2005), Photoinduced Graft Polymerization of 2-Acrylamido-2-methyl-1-propanesulfonic acid/Triethylene Glycol Dimethacrylate System onto Microporous Polypropylene Film, European Polymer Congress, Moskow

Y.G. Devrim, E. Pişkin, (2005), Modification of Polypropylene Based Membranes for Possible Use as Proton Exchange Membranes in Fuel Cells, International Hydrogen Energy Congress and Exhibition IHEC 2005, Turkey

Y.G. Devrim, Z. M.O. Rzaev, E. Pişkin, (2005), Physically and Chemically Crosslinked Poly(maleic anhydride-alt-styrene)-co-2-acrylamido-2-methyl-1-propanesulfonic acid)s as Proton-Exchange Membranes’, International Hydrogen Energy Congress and Exhibition IHEC 2005, Turkey

R.M. Pidaparti, H.U. Akay (2004), ME Curriculum Redesign Through an Assessment Process, Proceedings of the 2004 American Society for Engineering Education Annual Conference & Exposition, pp. 123-129

Y.G. Devrim, Z. M.O. Rzaev, E. Pişkin, (2004), Yılser Güldoğan Devrim, Zakir Rzaev, Erhan Pişkin, Grafting and Graft(co)polymerization of Polypropylene, MACRO 2004-40th IUPAC World Polymer Congress Paris, France

Y.G. Devrim, Z. M.O. Rzaev, E. Pişkin, (2004), 5. Yılser Güldoğan Devrim, Zakir Rzaev, Erhan Pişkin, Grafting of Powder and Granular Polypropylene in Melt by Using Reactive Extrusion, MACRO 2004-40th IUPAC World Polymer Congress Paris, France

Y.G. Devrim, Z. M.O. Rzaev, E. Pişkin, (2004), Complex- Radical Terpolymerization of maleic anhydride–styrene–2-acrylamido-2-methyl-1-propane sulfonic acid System'., MACRO 2004 - 40th IUPAC World Polymer Congress Paris, France, 2004

Y.G. Devrim, Z. M.O. Rzaev, E. Pişkin, (2004), Anhydrıdo-Carboxylatıon of Polypropylene: Synthesis and Characterızatıon of Poly(PP-g-MA), Poly(PP-g -CA) and PolyPP-g-(MA-alt-AA), Fifteenth International Conference on Organic Synthesis IUPAC ICOS-15, Japan., 3-F-01

Y.G. Devrim, Z. M.O. Rzaev, E. Pişkin, (2004), Polypropylene Functionalization in Solution and in Melt by Reactive Extrusio, 11th International Conference on Polymers and Organic Chemistry , Czech Republic, P42

Bayka, D., Karel, A.,Çakar,D. (2000), Determination of the Size of the Air Pollution Across Turkey Created by Vehicles in the Land Transport Sector, IASTED International Conference on Applied Simulation and Modelling, South Korea, 1, pp

Bayka, D. (2000), Determination of the Size of the Air Pollution Across Turkey Created by Vehicles in the Land Transport Sector, IASTED International Conference on Applied Simulation and Modelling

Bayka, D. (2000), A Reverse Engineering Method for Design of Engine Components, IASTED International Conference on Modelling and Simulation

Bayka, D. (1996), Simulation Of The Thermodynamic Cycle In A Spark Ignition Engine With Emphasis On Combustion Chamber Geometry, IASTED International Conference, Modelling and Simulation, Pittsburgh, USA

Bayka, D. (1996), Simulation Of The Thermodynamic Cycle In A Spark Ignition Engine With Emphasis On Combustion Chamber Geometry, IASTED International Conference, Modelling and Simulation

Bayka, D. (1995), Simulation Of Combustion Process In A Spark Ignition Engine On A Personal Computer, ECOS'95, Proc. of The Int. Conf

Bayka, D. (1994), The Performance Evaluation Of Engines Used in Ankara Natural Gas Conversion Project, The 4th Biennial International Conference & Exhibition On Natural Gas Vehicles

Bayka, D. (1994), Simple And Effective Solution To Smoke Emission From Buses For Developing Countries, 4th Biennial International Conference & Exhibition On Natural Gas Vehicles

Bayka, D. (1993), Thermal Boundary Layer Measurements Using A Multiple Thin Wire Resistance Thermometer In An Internal Combustion Engine, Third World Conference on Experimental Heat Transfer, Fluid Mechanics and Thermodynamics

Bayka, D. (1992), Conversion Of A City Bus To Dual Fuel And Evaluation Of Its Performance, IGRC 92, 1992 International Gas Research Conference

Bayka, D. (1991), Effect of Inlet Manifold Design and Increase of Compression Ratio on the Performance and Exhaust Emissions of a 1300 cc SI Engine using Methanol-Ethanol-Water-Gasoline Blends, 9th Miami International Congress on Energy and Environment, Environment and Energy

Bayka, D. (1991), Operation Of A Diesel Engine With Compressed Natural Gas, Symposium on the Use of CNG and LPG as Fuel for Internal Combustion Engines

Bayka, D. (1983), A Droplet Evaporation Rate Controlled Combustion Model, AGARD, Combustion Problems in Turbine Engines

Bayka, D. (1982), Instantaneous Heat Transfer in a Single Stroke Rapid Compression Machine, ASME Heat Transfer Conference

National Conference Proceedings

A.A. Sivas, E. Oktay, H.U. Akay, M. Manguoglu (2015), Paralel Topoloji Çözümleri için Etkin Bir Önkoşullandırma, 4. Ulusal Yüksek Başarımlı Hesaplama Konferansı, ODTÜ, Ankara

O. Özşahin, E. Budak, H. N. Özgüven (2015), Frezeleme esnasındaki tezgah dinamiğinin belirlenmesi ve modellenmesi, 6. Talaşlı İmalat Sempozyumu, İstanbul

Mertcan Kurt, Farid Saeidi, Tansel Deniz, Ercan Gürses (2014), Simulation of Shaped charge Jet and Non-explosive Reactive Armor Interaction), SAVTEK 2014, METU, Ankara

D.Ergun, Y. Devrim, N. Baç, I.Eroğlu, (2014), Yüksek Sıcaklıkta Çalışabilen Proton Değişim Zarlı Yakıt Hücreleri, Ulusal Hidrojen Enerjisi Kongresi (UHK 2009) ve Sergisi , Kocaeli

Y.Güldoğan, T.Dursoy, T.Ö. Bozdemir (2014), Mengen Linyitinin Piroliz Kinetiğinin Termogravimetrik Analiz Yöntemi ile İncelenmesi, XIII. Ulusal Kimya Sempozyumu, Samsun

A. Çomak, R. Koca, E. Özlü, O. Özşahin, E. Öztürk, T. Tunç, Taner , E. Uysal, E. Budak, H. N. Özgüven (2013), Talaşlı imalat süreçlerinin kararlılığı ve takım tezgah dinamiği (Machining process stability and machine tool dynamics),, 16. Ulusal Makina Teorisi Sempozyumu (UMTS), Erzurum

M. Emin Tamer, Omer Music, İzzet Özdemir, Besim Baranoğlu, Ali Sakin, İsmail Durgun (2013), Artımlı sac şekillendirme yönteminin sayısal analizinde açık adım ve kapalı adım sonlu eleman yöntemi çözümlerinin karşılaştırmalı analizi, TUMTMK XIII. Ulusal Mekanik Kongresi, Manisa, Türkiye

Barbaros Çetin, Besim Baranoğlu (2013), Mikrokanal içinde parçacık hareketinin sınır eleman yöntemi ile analizi, TUMTMK XIII. Ulusal Mekanik Kongresi, Manisa, Türkiye

M. Emin Tamer, Omer Music, İzzet Özdemir, Besim Baranoğlu, Ali Sakin, İsmail Durgun (2013), Artımlı şekillendirme tekniği ile prototip sac parça üretimi, Makina İmalat Teknolojileri Kongresi, Bursa, Türkiye

Omer Music, M. Emin Tamer, İzzet Özdemir, Besim Baranoğlu, Ali Sakin, İsmail Durgun (2012), Prototip parça imalatında artımlı sac şekillendirme yönteminin kullanımına yönelik sonlu elemanlar yöntemi tabanlı sistemin doğrulanması, 6. Otomotiv Teknolojileri Kongresi, Bursa, Turkiye

Omer Music, M. Emin Tamer, İzzet Özdemir, Besim Baranoğlu, Ali Sakin, İsmail Durgun (2012), Prototip parça imalatında artımlı sac şekillendirme işlemlerinin kullanımı: simülasyon, imalat ve karşılaştırma, 12. Üretim Araştırmaları Sempozyümü, İzmir, Turkiye

Besim Baranoglu, Moutaz Elgammi (2011), Elastoplastik problemlerin çözümünde sınır eleman – sonlu eleman yöntemlerinin girişimli kullanımı, XVII. Ulusal Mekanik Kongresi, Elazığ, Turkiye

Emre Coruk, Celalettin Karadoğan, Besim Baranoğlu (2011), Sünek malzemelere ait akma eğrisinin çekme testindeki lokal boyun verme öncesi değerlere kadar dolaysız elde edilmesi, XVII. Ulusal Mekanik Kongresi, Elazığ, Turkiye

Y. Devrim, S. Erkan, N. Baç, İ. Eroğlu (2010), Nafion/TiO2 Nanokompozit Membranların PEM Yakıt Pili Performansları Üzerine TiO2 Miktarının Etkisi, Ulusal Kimya Mühendisliği Kongresi, UKMK 2010, Ankara

D.Ergun, Y. Devrim, N. Baç, I.Eroğlu, (2010), Yüksek Sıcaklık PEM Yakıt Pilleri için Polibenzimidazole Membranların Hazırlanması ve Performanslarının Belirlenmesi, Ulusal Kimya Mühendisliği Kongresi, UKMK 2010, Ankara

Y.Devrim, S.Erkan, N.Baç, İ. Eroğlu (2009), PEM yakıt pilleri için Nafion/TiO2 kompozit membranların hazırlanması ve yakıt pili performanslarının belirlenmesi, IV Ulusal Hidrojen Enerjisi Kongresi (UHK 2009) ve Sergisi , Kocaeli

Y. Devrim, S. Erkan, N. Baç, İ. Eroğlu (2009), Nafion/TiO2 Nanocomposite Membranes for Proton Exchange Membrane Fuel Cells, 5. Ulusal Nanobilim ve Nanoteknoloji Konferansı (NanoTR-5), Eskişehir

Y. Devrim, N. Baç, İ. Eroğlu (2008), Proton Değişim Membran Yakıt Pilleri İçin Kompozit Membranların Hazırlanması, Sekizinci Ulusal Kimya Mühendisliği Kongresi, Malatya

Y. Devrim, N. Baç, İ. Eroğlu (2008), Proton Değişim Membran Yakıt Pilleri İçin Sülfolanmış Poli(arlen Eter Sülfon) Membranların Sentez ve Karakterizasyonu, Sekizinci Ulusal Kimya Mühendisliği Kongresi, UKMK-8

Besim Baranoğlu, Yalçın Mengi (2007), Termoelastisite ve termoviskoelastisite analizinde ikili karĢıtlık sınır eleman yönteminin kullanımı, TUMTMK XV. Ulusal Mekanik Kongresi, Isparta, Türkiye

S. Eğri, Y. Güldoğan, Z. M.O. Rzaev, E. Pişkin, (2004), Reaktif Ekstrüzyonla Toz Ve Granül Polipropilenin Maleik Anhidrit Aşılanması, Polsem 2004, Mersin

Y. Güldoğan, Z. M.O. Rzaev, E. Pişkin, (2003), Polipropilenin Çözelti Faz Modifikasyonu: Poly(PP-g-MA), Poly(PP-g-CA) ve PolyPP-g-(MA-alt-AA) Sentezi ve Karakterizasyonu, III. Ulusal Ambalaj Kongresi ve Sergisi, İzmir

Y. Güldoğan, Z. M.O. Rzaev, E. Pişkin, (2003), Çözelti Ve Eriyik Fazda (“Reaktif Ekstrüzyon”) Polipropilen Üzerine Maleik Anhidrit Aşılanması, III. Ulusal Ambalaj Kongresi Ve Sergisi, İzmir

Y.Güldoğan, T.Dursoy, T.Ö. Bozdemir (2002), Mengen ve Gediz Linyitlerinin Piroliz Kinetiklerine Isıtma Hızının Etkisi, UKMK-5, Ankara

Bayka, D. (2000), A Reverse Engineering Method for Design of Engine Components, IASTED International Conference on Modelling and Simulation, Pittsburgh, USA

Yalçın Mengi, A. Hakan Argeşo, Besim Baranoğlu (1999), Sınır Eleman Yöntemine Genel Bakış ve Bazı Uygulamalar, XI. Ulusal Mekanik Kongresi, Bolu, Türkiye

Y.Güldoğan, T.Dursoy, T.Ö. Bozdemir (1998), Tuçbilek Linyitinin Piroliz Kinetiğinin İncelenmesi, XII. Ulusal Kimya Sempozyumu, Edirne

Y.Güldoğan, V. Evren, T.Dursoy, T.Ö. Bozdemir (1998), Tunçbilek Linyiti ve Turba Karışımlarının Piroliz Kinetiklerinin İncelenmesi, XII. Ulusal Kimya Sempozyumu, Samsun

Book Chapters

E. Billur (2016), Chapter 12: Hot Formed Steels, “Automotive Steels - Design, Metallurgy, Processing and Applications”, edited by ed. Radhakanta Rana and Shiv Brat Singh

Barbaros Çetin, Besim Baranoğlu (2015), "Boundary elements in Microfluidics" in : Encyclopedia of Microfluidics and Nanofluidics, Springer, pp. 202-213

E. Billur, A.E. Tekkaya (2012), Chapter 3: Plastic Deformation: Strain and Strain Rate, "Sheet Metal Forming - Fundamentals", edited by T. Altan & A.E. Tekkaya, ASM International., pp 27-32

H. Palaniswamy, E. Billur (2012), Chapter 4: Plastic Deformation: Flow Stress, Anisotropy and Formability, "Sheet Metal Forming - Fundamentals", edited by T. Altan & A.E. Tekkaya, ASM International., pp. 33-52

E. Billur (2012), Chapter 9: Principles of Sheet Forming Presses, "Sheet Metal Forming - Fundamentals", edited by T. Altan & A.E. Tekkaya, ASM International., pp. 129-144

T. Yelich, E. Billur (2012), Chapter 10: Mechanical Presses for Sheet Forming, "Sheet Metal Forming - Fundamentals", edited by T. Altan & A.E. Tekkaya, ASM International., pp. 145-159

E. Billur (2012), Chapter 12: Hydraulic Presses, "Sheet Metal Forming - Fundamentals", edited by T. Altan & A.E. Tekkaya, ASM International., pp. 181-201

E. Billur (2012), Chapter 16: Die Materials and Coatings, "Sheet Metal Forming - Applications", edited by T. Altan & A.E. Tekkaya, ASM International., pp. 317-338

Ö. Aslan, Samuel Forest (2011), Micromorphic approach versus phase field approach to gradient plasticity and damage with application to cracking in metal single crystals, Lecture Notes in Applied and Computational Mechanics, 55, 135-154

H.U. Akay, E. Yılmaz, R.U. Paylı, A. Ecer (2009), Hybrid Parallelism for CFD Simulations: Combining MPI with OpenMP, Parallel Computational Fluid Dynamics 2007, Springer-Verlag, pp. 401-408

H.U. Akay, R.U. Paylı, E. Yılmaz, A. Ecer (2009), Impact of TeraGrid on Large-Scale Simulations and Visualizations, Parallel CFD Conference 2007, pp. 409-415

H.U. Akay, E. Oktay, I. Mertttopcuoğlu, C. Şener, A. Ketenci (2008), Parallel Shape Optimization of a Missile on a Grid Infrastructure, Int. Conf. on Parallel Computational Fluid Dynamics Conference 2008, Lyon, France, 42-45

H.U. Akay, E. Yılmaz, R.U. Paylı, A. Ecer, J. Liu (2008), Scalibility Considerations of a Parallel Flow Solver on Large Scale Computing Systems, Int. Conf. on Parallel Computational Fluid Dynamics, Lyon, France, 62-69

H.U. Akay, S. Chien, G. Makinabakan, A. Ecer (2008), Dynamic Load Balancing on Windows Based Multi-core PCs, Int. Conf. on Parallel Computational Fluid Dynamics, Lyon, France, 83-90

Articles

E. Billur, B. Çetin, M. Gürleyik (2016), Yeni Nesil Yüksek Dayanimli Çelikler: Gelişmeler, Trendler ve Kısıtlar, International Journal of Scientific and Technological Research, Vol. 2, No: 1, pp 50-62

Besim Baranoğlu, Omer Music, M. Emin Tamer, Ali Sakin, İsmail Durgun (2013), Prototip parça imalatı için sonlu elemanlar yöntemine dayalı bir sistem, Endüstri Otomasyon

Elif Aydın, Besim Baranoğlu (2012), Elektromanyetik Şekillendirme, Cumhuriyet Bilim ve Teknoloji Dergisi

Besim Baranoğlu, İsmail Bircan (2012), Metal Şekillendirme Mükemmeliyet Merkezi Altyapı Oluşturma Projesi, İz Dergisi (Atılım Üniversitesi)