Samad NADIMI BAVIL OLIAEI, Yrd. Doç. Dr.

Samad NADIMI BAVIL OLIAEI

İletişim Bilgileri

Telefon:8765
Ofis:A-3024/I-106(MFCE)
Bağlı Olduğu Bölüm:Makine Mühendisliği

Akademik Dereceler

DereceAlanÜniversiteYıl
Doktora Makine Mühendisliği Bilkent Üniversitesi 2016
Yüksek Lisans Makine Mühendisliği University of Tabriz 2007
Lisans İmalat ve Üretim Mühendisliği University of Applied Science and Technology 2005


Akademik Ünvanlar

DereceÜniversiteAyYıl
Yardımcı Doçent ATILIM Üniversitesi Haziran 2017
Post Doktorant Bilkent Üniversitesi Nisan 2017


Araştırma Konuları

Kesici Takımlaar ve aşınma, Üretim Yöntemleri, İmalatta Yüzey Pürüzlülüğü, Sünek işleme modu , Mikro Kesici Takım Tasarımı ve imalatı


Yayınlar

SCI, SCI-E, SSCI ve AHCI

Oliaei, S. N. B., & Karpat, Y. (2017), Built-up edge effects on process outputs of titanium alloy micro milling, Precision Engineering, 49, pp. 305-315

Oliaei, S. N. B., & Karpat, Y. (2017), Investigating the influence of friction conditions on finite element simulation of microscale machining with the presence of built-up edge, The International Journal of Advanced Manufacturing Technology, 90(1-4), pp. 819-829

Oliaei, S. N. B., & Karpat, Y. (2016), Investigating the influence of built-up edge on forces and surface roughness in micro scale orthogonal machining of titanium alloy Ti6Al4V, Journal of Materials Processing Technology, 235, pp. 28-40

Oliaei, S. N. B., & Karpat, Y (2016), Influence of tool wear on machining forces and tool deflections during micro milling, The International Journal of Advanced Manufacturing Technology, 84(9-12), pp. 1963-1980

Yavuz, C., Oliaei, S. N. B., Cetin, B., & Yesil-Celiktas, O. (2016), Sterilization of PMMA microfluidic chips by various techniques and investigation of material characteristics, The Journal of Supercritical Fluids, 107, pp. 114-121

Zeinali, S., Çetin, B., Oliaei, S. N. B., & Karpat, Y. (2015), Fabrication of continuous flow microfluidics device with 3D electrode structures for high throughput DEP applications using mechanical machining, Electrophoresis, 36(13), pp. 1432-1442

Kalajahi, M. H., Ahmadi, S. R., & Oliaei, S. N. B. (2013), Experimental and finite element analysis of EDM process and investigation of material removal rate by response surface methodology, The International Journal of Advanced Manufacturing Technology, 69(1-4), pp. 687-704.

Shabgard, M., Ahmadi, R., Seyedzavvar, M., & Oliaei, S. N. B. (2013), Mathematical and numerical modeling of the effect of input-parameters on the flushing efficiency of plasma channel in EDM process, International Journal of Machine Tools and Manufacture, 65, pp. 79-87.

Shabgard, M. R., Seyedzavvar, M., Oliaei, S. N. B., & Ivanov, A. (2011), A numerical model for predicting depth of heat affected zone in EDM process for AISI H13 tool steel, Journal of Scientific & Industrial Research , 70, pp. 493-499

Shabgard, M., Oliaei, S. N. B., Seyedzavvar, M., & Najadebrahimi, A. (2011), Experimental investigation and 3D finite element prediction of the white layer thickness, heat affected zone, and surface roughness in EDM process, Journal of mechanical science and technology, 25(12), pp. 3173-3183.

Shabgard, M. R., Seyedzavvar, M., & Oliaei, S. N. B. (2011), Influence of input parameters on characteristics of EDM process, Strojniški vestnik-Journal of Mechanical Engineering, 57(9), pp. 689-696.

Nadimi Bavil Oliaei , S., Khoushehmehr, R. J., Rohani, B., & Mostafapour, A. (2008), Investigation and analysis of weld induced residual stresses in two dissimilar pipes by finite element modeling, Journal of Applied sciences, 8(6), pp. 1014-1020.

Diğer Hakemli Dergiler

Oliaei, S. N. B., Özdemir, C., & Karpat, Y. (2014), On-machine fabrication of PCD and WC micro end mills using micro electro discharge machining, International Journal of Mechatronics and Manufacturing Systems, 7(4-6), pp. 246-264

Uluslararası Konferans Bildirileri

Bahram Lotfi Sadigh, Samad Nadimi Bavil Oliaei, Samad Dadvandipour (2017), An Ontology Based Semantic Machine Tool Selection for Multi Scale Wire EDM Processes, Solid State Phenomena, Athens, Greece, pp. 470-477

Samad Nadimi Bavil Oliaei, Mahmoudreza Eivazzadeh, Samad Dadvandipour (2017), Finite Element Modeling of Incremental Sheet Metal Forming of Aluminum Alloy Al 1100, XIV INTERNATIONAL CONGRESS SUMMER SESSION “MACHINЕS.TECHNOLОGIES.MATERIALS” , VARNA, BULGARIA, pp. 254-257

Oliaei, S. N. B., & Karpat, Y. (2016), Fabrication of PCD Mechanical Planarization Tools by using μ-Wire Electrical Discharge Machining, Procedia CIRP, 46, pp. 311-316, (ISEM XVIII-Tokyo, JAPAN).

Oliaei, S. N. B., Karpat Y., (2016), Influence of WEDM Strategies on Surface Roughness of Tungsten Carbide, The 17th International Conference on Machine Design and Production, Bursa, TURKEY.

Oliaei, S. N. B., Kanlı, M., Karpat, Y., (2016), Mechanistic Modeling of Micro Milling Including Tool Run-Out, 7th International Symposium On Machining, Marmara University, Istanbul, TURKEY.

Oliaei, S. N. B., Karpat Y. (2015), An Investigation of Ductile Regime Machining of Fused Silica Glass Using PCD Micro Tools, 8th International Conference and Exhibition on Design and Production of Machines and Dies/Molds, Kuşadası/Aydin, TURKEY.

Oliaei, S. N. B., & Karpat, Y. (2014), Experimental investigations on micro milling of Stavax stainless steel, Procedia CIRP, 14, pp. 377-382, ( HPC2014-California, USA).

Oliaei, S. N.B., Özdemir, C., Karpat, Y. (2013), Fabrication of Micro Ball End Mills Using Micro Electro Discharge Machining (μ-EDM), 7th International Conference and Exhibition on Design and Production of Machines and Dies/Molds, Antalya, TURKEY.

Ergür A., Oliaei, S.N.B., Karpat, Y., (2012), Design and Fabrication of Micro Cutting Tools Using Micro Electro Discharge Machining (µ-EDM), 15th International Conference on Machine Design and Production, Denizli, TURKEY.

Oliaei, S. N.B., Karpat, Y. (2012), Multi-scale Milling Force Modeling through a Finite Element Simulation Based Metamodel, 15th International Conference on Machine Design and Production, Pamukkale, Denizli, TURKEY.